Good news for those who are unable to visit Kielder Water and Forest Park to experience TRIGGER, an audio installation by Pipi Lovell-Smith and me.
The TRIGGER audio is now available to listen to online.
You wouldn't get the full experience because you would miss out on the spectacular scenery that is Kielder Water and Forest Park. But at least you could imagine it!
Even if you are able to get to Kielder, it may be worth downloading the audio incase the weather is bad and there has not been enough solar energy to charge the speaker. If that is the unfortunate situation, at least you could listen to it if you had downloaded it.
It is available on soundcloud, YouTube and Vimeo at the following addresses:
https://soundcloud.com/heleninglasgow/trigger-an-audio-installation-at-kielder-water-and-forest-park
https://youtu.be/oV9bAgwORg8
https://vimeo.com/174118618
We hope you enjoy it. Let us know what you think.
Showing posts with label TRIGGER. Show all posts
Showing posts with label TRIGGER. Show all posts
Friday, 15 July 2016
Tuesday, 28 June 2016
TRIGGER working again!
Today Pipi and I went up to Kielder to do some maintenance work on our audio installation. When we first installed the work, the solar panel was supplying the speaker with the power necessary to play the audio and it was working well. However, at the opening event we were very disappointed to discover that the sound was no longer playing and the speaker would not switch on.
Today we went to investigate the nature of the problem and try to find a solution. We were armed with all kinds of tools and equipment giving us plenty of options that could be used to solve the problem.

On arrival we checked that the solar panel was charging (which it was), unplugged the speaker and plugged a MP3 player into the solar panel to check whether the problem was with the speaker or the solar panel. When plugged into the solar panel the MP3 player began to play our audio. This indicated that the speaker was the problem. We had sealed the speaker in a plastic box and placed that within the box of the structure. All joins were sealed to minimise any water getting into the speaker. After what seemed like hours of peeling the silicone off all the joins, we were able to remove the speaker from the shelf within the structure. We were surprised to discover that the speaker was full of water. We could hear it splashing around inside.
It was clear that we were going to have to find an alternative to using the speaker, and so decided to replace it with the MP3 player and headphones. Once again we sealed all the equipment into place and filled any holes with silicone in order to prevent any water entering the structure and damaging the equipment. The MP3 player is powered by the solar panel, and because it requires less energy than the speaker, it should remain charged for a long period of time.
Now all we have to do is keep our fingers crossed that the sun shines and there are no more storms.

If you do visit, please share your thoughts about the work with us. We are keen to hear what you think.
Today we went to investigate the nature of the problem and try to find a solution. We were armed with all kinds of tools and equipment giving us plenty of options that could be used to solve the problem.
On arrival we checked that the solar panel was charging (which it was), unplugged the speaker and plugged a MP3 player into the solar panel to check whether the problem was with the speaker or the solar panel. When plugged into the solar panel the MP3 player began to play our audio. This indicated that the speaker was the problem. We had sealed the speaker in a plastic box and placed that within the box of the structure. All joins were sealed to minimise any water getting into the speaker. After what seemed like hours of peeling the silicone off all the joins, we were able to remove the speaker from the shelf within the structure. We were surprised to discover that the speaker was full of water. We could hear it splashing around inside.
It was clear that we were going to have to find an alternative to using the speaker, and so decided to replace it with the MP3 player and headphones. Once again we sealed all the equipment into place and filled any holes with silicone in order to prevent any water entering the structure and damaging the equipment. The MP3 player is powered by the solar panel, and because it requires less energy than the speaker, it should remain charged for a long period of time.
Now all we have to do is keep our fingers crossed that the sun shines and there are no more storms.
If you do visit, please share your thoughts about the work with us. We are keen to hear what you think.
Friday, 17 June 2016
KIELDER ONSITE - Opening event
A wonderful day was had by all on our visit to Kielder Water and Forest Park for the opening event of the KIELDER: ONSITE exhibition.
Our first drop off point was the Lewisburn inlet, the site of Simon Court's floating sculpture, Waveform.
Simon explains,
"The idea for this floating sculpture
began on Waiheke Island off the coast of New
Zealand in response to the sea, natural bush and
a working boat yard. This has been translated to
respond to Kielder water. The form can be seen
as a wave, crescent moon, or part of the Yin Yang
symbol."
The coach then drove to Kielder Castle where we begun the walk along the Duchess Trail. The majority of the artworks were located on this route.
The first artwork we came across on this meandering circular route through part of the forest was Eve Kossmann's Forest Clock. This collection of handmade clay mushrooms are displayed in an arrangement resembling that of a sundial.
"This
installation represents a documentation of time
since the artist’s first visit to Kielder as a child. In
an ever-changing environment mushrooms have
remained a small yet beautiful life form on the
forest floor, often overlooked in such a vast site."
Pyramidal Edifice is a copper and steel sculpture by Anthony Hensman.
Anthony explains that "This sculpture suggests the structural order of
the forest. Through use of the golden ratio, the
tower mathematically structures the space at
the edge of vision. Its exterior mass becomes a
paradoxical container for the indeterminacy of
the immaterial. "
A Long Wait by Mirela Bistran is an installation
of three chairs that have been made from
stumps of trees cut to thin the forest. This work
contemplates the very slow regenerative power
of the forest.
Stop When Light Shows Red by Oliver
Hoffmeister & Harry Pickup consists of a pair of traffic lights facing each other and suspended in the trees. As night time sets in, motion sensors detect the movement of people which in turn switch the red lights on the traffic lights.
"In this installation, the dissonance created between the urban traffic lights and the seemingly ‘natural’ landscape helps allude to the forest’s past of villages such as Plashetts."
Mirela Bistran's Tree Shirt consists of a long piece of fabric, shaped in the
form of a half-cylinder, rising from a stump.
The intention for this piece is to resemble a shirt – a plain tree shirt – which reflects a matrix for all the trees in a monoculture forest.
Leina Taylor's "work reflects the forest’s unusual beginnings
as a man-made site.
"Sculptures made up of organic matter sandwiched between layers of plaster occupy the forest space and slowly disintegrate, displaying the effects of the environment on its man-made structure."
Nearly back at the start of the Duchess Trail, we found J J Lloyd's artwork, Being Here. Nestled in a patch of land off the beaten track, a vinyl disc marks the spot.
This is a giant version of the symbol used on the Kielder visitor maps to indicate the location of an artwork. The works explores reality and symbolism.
The group then made our way to the Observatory to see TRIGGER. Pipi and I were gutted to discover that the sound was not playing and the speaker could not be switched on. After all our research, planning and lots of effort, we were disappointed that it was not in the state that we left it. A potential reason why it was not operating is because the solar panel did not have sufficient solar energy to charge the speaker. However, there are many variables and reasons why it was not playing and so we will go up and investigate further. We are thinking of other solutions to enable the audience to hear the sound whilst standing under the structure. One possibility is to install a MP3 player and a set of headphones within the inside of the box.
A little way down the road is James Turrell's Skyspace, the venue for the Sarah Grundy's performance.
The voice
was employed to depict a possible future for the
forest. Water was the focus of the performance
using actions linked to ritual.
It was a great day celebrating the completion of a variety of works made by students at different stages of their Fine Art education at Newcastle University.
Thanks to those who came along. I hope that you enjoyed it.
The works will be installed until 30th September 2016, so there is still plenty of time to see them for yourself!
Monday, 13 June 2016
You are invited to the opening event of KEILDER: ON SITE - Thursday 16th June 2016 - FREE TRANSPORT
You are invited to the opening event of KEILDER: ON SITE
Opening event: Thursday 16th June 2016
KIELDER: ONSITE / OFFSITE is a collaborative project between Newcastle University’s Fine Art Department and The Kielder Partnership. An ambitious year-long project, it explores opportunities for visual arts within the unique environment of Kielder Water & Forest Park.
ONSITE is the culmination of the project, a set of temporary works situated in and around the forest. The works are site responsive and interpret the forest in different ways. Although diverse they explore contemporary interrelated themes of narrative, identity, place and transience.
TRANSPORT ARRANGEMENTS
A coach will leave the lay-by near the Hancock Museum on Claremont Road, Newcastle at 10:30am.
It will drive to Kielder Water and Forest Park and will stop at Lewisburn inlet, Kielder Castle and Kielder Observatory.
At each location we will visit the artworks situated in the area before boarding the coach and travelling to the next site.
It is anticipated that the coach will depart from Kielder Water and Forest Park at 6pm at the latest, expecting to be back in Newcastle by 8pm.
The coach will return to the lay-by near the Hancock Museum on Claremont Road.
Although the coach will depart promptly at 10:30am, the timings for the rest of the day are not exact so some flexibility is required.
The coach is free but there are limited places on the coach so booking is required.
If you would like to attend the opening event please leave a message on the KIELDER: ONSITE/OFFSITE website stating how many places you would like to book on the coach.
Participating Artists:
Mirela Bistran / Rochus Braun / Simon Court / Sarah Grundy / Anthony Hensman / Oliver Hoffmeister & Harry Pickup / Eve Kossmann / JJ Lloyd / Helen Shaddock and Pipi-Lovell Smith / Leina Taylor
KEILDER: ONSITE / OFFSITE is funded by The Bartlett Fine Art Endowment, and supported by The Forestry Commission, Northumbrian Water and Keilder Art and Architecture.
Saturday, 11 June 2016
Invitation to the opening event of KIELDER: ONSITE - Thursday 16th June 2016
You are invited to the opening event of KEILDER: ON SITE
Opening event: Thursday 16th June 2016
KIELDER: ONSITE / OFFSITE is a collaborative project between Newcastle University’s Fine Art Department and The Kielder Partnership. An ambitious year-long project, it explores opportunities for visual arts within the unique environment of Kielder Water & Forest Park.
ONSITE is the culmination of the project, a set of temporary works situated in and around the forest. The works are site responsive and interpret the forest in different ways. Although diverse they explore contemporary interrelated themes of narrative, identity, place and transience.
TRANSPORT ARRANGEMENTS
A coach will leave the lay-by near the Hancock Museum on Claremont Road, Newcastle at 10:30am.
It will drive to Kielder Water and Forest Park and will stop at Lewisburn inlet, Kielder Castle and Kielder Observatory.
At each location we will visit the artworks situated in the area before boarding the coach and travelling to the next site.
It is anticipated that the coach will depart from Kielder Water and Forest Park at 6pm at the latest, expecting to be back in Newcastle by 8pm.
The coach will return to the lay-by near the Hancock Museum on Claremont Road.
Although the coach will depart promptly at 10:30am, the timings for the rest of the day are not exact so some flexibility is required.
The coach is free but there are limited places on the coach so booking is required.
If you would like to attend the opening event please leave a message on the KIELDER: ONSITE/OFFSITE website stating how many places you would like to book on the coach.
Participating Artists:
Mirela Bistran / Rochus Braun / Simon Court / Sarah Grundy / Anthony Hensman / Oliver Hoffmeister & Harry Pickup / Eve Kossmann / JJ Lloyd / Helen Shaddock and Pipi-Lovell Smith / Leina Taylor
KEILDER: ONSITE / OFFSITE is funded by The Bartlett Fine Art Endowment, and supported by The Forestry Commission, Northumbrian Water and Keilder Art and Architecture.
Wednesday, 8 June 2016
TRIGGER Install at the Observatory, Kielder Water and Forest Park
After much preparation, today was the big day; installing TRIGGER at our chosen site by the Observatory at Kielder Water and Forest Park.
On arrival we surveyed the ground where we had planned to site the work. The area around had become rather overgrown with grass and cotton plants, but we were surprised to find that the exact spot that we had marked out previously for TRIGGER was pretty much the same. Even the 4 twigs we had put in place to mark where the structure was to go were still in place!
We began by measuring out the area where the posts were to be instead, and dug the holes for the poles to be inserted into. The ground was very soft, and we were able to scoop out the material (it can hardly be described as earth!) with our hands. The smell was overpoweringly disgusting, and I dread to think what it was that was producing such a pungent smell!
Having already determined which pole needed to go into each hole, our next task was to insert each pole into each hole. Thankfully we had a very willing and able troop of helpers at hand!
Once the posts were meeting at the top, we inserted the bolts into the holes we had drilled in the posts on our last visit to Kielder.
Amazingly, the bolts fitted into the holes with very little difficulty, and the structure was rather secure. With a little bit of wiggling and readjusting, we were able to get the structure upright and level.
We then unwrapped the box which already contained the speaker and USB. The solar panel had been attached.
We hoisted the box up inside the legs, and tightened the jubilee clips to hold the box onto the posts in the correct place.
Before we tighten the jubilee clips securely, we ensured that all levels were even and that the box was in the correct place and at the right angle. We also tested that the audio was working properly to ensure that we wouldn't need to take the box off the posts. All was good to go!
We poured water into each of the holes in the ground and poured postcrete into the holes and waited for about 20 minutes for it to solidify.
We tightened the jubilee clips and bolts and then applied the finishing touches such as the bands of coloured tape at the top and bottom of the posts. We also added a couple of additional stripes to the box to make it more eye catching.
We spent some time adjusting the volume of the audio. After a good wipe over and few last touches of black paint we were able to stand back and enjoy the results!
On arrival we surveyed the ground where we had planned to site the work. The area around had become rather overgrown with grass and cotton plants, but we were surprised to find that the exact spot that we had marked out previously for TRIGGER was pretty much the same. Even the 4 twigs we had put in place to mark where the structure was to go were still in place!
We began by measuring out the area where the posts were to be instead, and dug the holes for the poles to be inserted into. The ground was very soft, and we were able to scoop out the material (it can hardly be described as earth!) with our hands. The smell was overpoweringly disgusting, and I dread to think what it was that was producing such a pungent smell!
We then measured the each pole and marked the place of the pole that should be at ground level. We also measured the depth of each hole and calculated how much of the bottom of the tree pole we needed to saw off in order for the post to be the right size.
Having already determined which pole needed to go into each hole, our next task was to insert each pole into each hole. Thankfully we had a very willing and able troop of helpers at hand!
Once the posts were meeting at the top, we inserted the bolts into the holes we had drilled in the posts on our last visit to Kielder.
Amazingly, the bolts fitted into the holes with very little difficulty, and the structure was rather secure. With a little bit of wiggling and readjusting, we were able to get the structure upright and level.
We then unwrapped the box which already contained the speaker and USB. The solar panel had been attached.
We hoisted the box up inside the legs, and tightened the jubilee clips to hold the box onto the posts in the correct place.
Before we tighten the jubilee clips securely, we ensured that all levels were even and that the box was in the correct place and at the right angle. We also tested that the audio was working properly to ensure that we wouldn't need to take the box off the posts. All was good to go!
We poured water into each of the holes in the ground and poured postcrete into the holes and waited for about 20 minutes for it to solidify.
We tightened the jubilee clips and bolts and then applied the finishing touches such as the bands of coloured tape at the top and bottom of the posts. We also added a couple of additional stripes to the box to make it more eye catching.
We spent some time adjusting the volume of the audio. After a good wipe over and few last touches of black paint we were able to stand back and enjoy the results!
We would like to thank everyone who helped with the install, and everyone who assisted us on the way. It has been a pleasure working with you and we hope that you enjoy the resulting artwork.
More details of the launch and exhibition duration will be issued shortly.
Tuesday, 7 June 2016
TRIGGER progress in preparation for install C
With the TRIGGER install date confirmed for tomorrow, Tuesday 7th June, Pipi and I have been finishing off as much of the structure as we can prior to install.
Over the past week we have spent hours applying layer after layer of white paint, sanding each layer to create a smooth brilliant white solid surface on which the fluorescent paint would lie.
When we were working on the piece for the KIELDER OFFSITE exhibition, the fluorescent paint had proved to be difficult to work with. It dries incredibly quickly making it very hard to blend strokes into each other.
Unfortunately, despite our efforts to create an ultra smooth white surface on which to apply the fluorescent paint, the paint did not apply evenly and we were unhappy with the quality of the finish. It appeared patchy, and was not very fluorescent.
We therefore decided to change the base colour of the box to black instead of the fluorescent yellow. We would add fluorescent yellow and orange tape to the box to brighten it up and make it more eye-catching.
We placed the equipment on a shelf and sealed the speaker and cabling into the top of the box.
We then added the solar panel to the top and side of the box in order to catch as many rays as possible.
Fingers crossed!
Subscribe to:
Posts (Atom)